Key Instruments - Series PV 9000 Flowmeter

Series PV 9000 Electronic Flowmeter

Features

Can be installed in any orientation with no effect on the flow rate
High-impact resistant polycarbonate case
Aluminum Body
Accuracy of ± 2% of Full Scale
Available with integral or remote digital display
0.0 - 5.0 VDC output

Series PV 9000 Electronic flowmeters, using differential pressure measurement / laminar flow element flow sensing technology, accurately measures the flow rate of non-hazardous, inert gases with an accuracy of ± 2% of full scale. The standard output for the PV 9000 meter is 0.0 - 5.0 VDC; the meter is also available with an integral or remote digital display, or 4 - 20 mA current signal. These electronic flow meters can be installed in any orientation with no effect on flow reading. All units are supplied with an aluminum body, high-impact resistant polycarbonate case and brass compression fittings.

Specifications

Click above to see dimensions

The PV9000
fully complies with EN 61000-6-1
to EN 61000-6-4
(Immunity and Emission Test Series)

Series PV 9000
Accuracy:	± 2% of Full Scale
Repeatability:	± 1% Full Scale
Response Time:	< 50 ms
Turndown Ratio:	50:1
Pressure Drop:	<0.75 PSI
Temperature Range:	50 to 122°F (10 to 50°C)
Supply Voltage¹:	6 - 26 VDC
Supply Current²:	3 mA
Output Voltage:	0 - 5 VDC
Output Current³:	4 - 20 mA
Maximum Pressure:	100 psig
1. Reverse polarity protection to 15 VDC max 2. 10 mA for units with display and RS-232 output 3. Not available with integral display

Series PV 9000 Options

Flow Rates
Model Code	Air (CCM)
050CCM 100CCM 200CCM 500CCM	1 - 50 2 - 100 4 - 200 10 - 500
Model Code	Air (LPM)
001LPM 002LPM 005LPM 020LPM 050LPM	0.02 - 1 0.04 - 2 0.1 - 5 0.4 - 20 1.0 - 50

Display / Output
Model Code	Description
VC	0 - 5 VDC / 4 - 20 mA Output, No Display
VRD	0 - 5 VDC / RS-232 Output, Integral Display

Accessories
Model Code	Description
EPS002	Wall mount power supply, 90 - 265 VAC input, 12 VDC output
ESC062	6' Ribbon cable with 9-pin sub-D connector & RS-232 communications port
RDD	Remote Digital Display
Consult Factory	Adaptors, 1/8" OD Tube & 1/4" OD Tube, 316 St. Steel compression fitting

Standard Gas Options
Gas Type	Code
Air Oxygen (O₂) Nitrogen (N₂) Carbon Dioxide (CO₂) Argon (Ar)	A O N C R

Ordering Information

Series PV 9000

Example:

200 CCM of Air, 0 - 5 VDC / 4 - 20 mA output (PV200CCMVCA)

	Model Code	Output	Gas
PV	200CCM	VC	A

Output

Gas

VC - 0 - 5 VDC / 4 - 20 mA & No Display
VRD - 0 - 5 VDC / RS-232 & Integral Display

A - Air
O - O₂
N - N₂

C - CO₂
R - Ar

Click above to see Data Sheet (PDF)